stainless steel
Louvre / Bird Proofing Mesh
Stocked
TechnicalStainless steel welded wire mesh supplied in rolls for louvre mesh and bird proofing buildings.
Stainless steel is the optimum solution for louvre mes and bird proofing. By selecting stainless steel you will utilise the numerous benefits including:
Corrosion resistant
Long term performance
 Minimal maintenance
 Strength
 Life cycle costing
 Low environmental impact
Stainless steel welded mesh is manufactured by the longitudinal and transverse wires being resistance welded together.
Stainless Steel Bushfire Mesh is often specified with Louvre Mesh.
BAL 12.5 – FZ (Bushfire Mesh)
SSWM Bushfre Mesh can be used to meet the requirements of AS3959 amdt 3 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.
Â
Australia’s largest stockist of Stainless Steel Wire & Mesh
We have the largest and most comprehensive Australian stock holding of stainless steel wire and mesh in our purpose laid out warehouse with over:
25 Stainless Steel Welded Mesh specifications in 1200 x 2400mm panels
40 Stainless Steel Welded Roll specifications in 30 metre rolls
Design & Install Considerations
Practical information for your consideration.
Care & Maintenance
Stainless steel is a low maintenance material, but not maintenance free. Refer to our CARE page for further information.
Speed to Market
Same day despatch when your order is received by 9am for Australia wide delivery.
Stainless Steel
BIRD PROOFING MESH
Louvre Bird Proofing Mesh
| wdt_ID | PARENT CODE | PRODUCT IMAGE | MESH MM | WIRE DIAMETER MM | TECHNICAL DATA SHEET | REQUEST A QUOTE | VARIANTS | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | SSWM 06.35 0.63 |  |
6.35 x 6.35 | 0.63 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 2 | SSWM 06.35 0.8 |  |
6.35 x 6.35 | 0.8 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 3 | SSWM 09.50 0.8 |  |
9.50 x 9.50 | 0.8 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 4 | SSWM 09.50 1.0 |  |
9.50 x 9.50 | 1 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 5 | SSWM 11.00 0.8 |  |
11.0 x 11.0 | 0.8 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 6 | SSWM 12.7 1.0 |  |
12.7 x 12.7 | 1 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 7 | SSWM 12.7 1.2 |  |
12.7 x 12.7 | 1.2 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 8 | SSWM 12.7 1.6 |  |
12.7 x 12.7 | 1.6 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 9 | SSWM 12.80 1.2 |  |
12.7 x 25.4 | 1.2 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 10 | SSWM 19.05 1.6 |  |
19.05 x 19.05 | 1.6 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 11 | SSWM 19.05 2.0 |  |
19.05 x 19.05 | 2 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 12 | SSWM 25.4 1.0 |  |
25.4 x 25.4 | 1 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 13 | SSWM 25.4 1.2 |  |
25.4 x 25.4 | 1.2 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 14 | SSWM 25.4 1.6 |  |
25.4 x 25.4 | 1.6 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 15 | SSWM 25.4 2.0 |  |
25.4 x 25.4 | 2 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 17 | SSWM 50.8 2.0 |  |
50.8 x 50.8 | 2 | Quote |
|
Cutting
Please place your welded roll orders that require cutting by 11:00am for same day cut and pick up by 2:30pm
Stainless Steel Welded Rolls More Information
Welded Wire Mesh Vs Woven Wire Mesh
Welded wire mesh generally has larger openings than woven wire mesh. The wires are welded at each intersection giving the mesh strength and the capability of maintaining its integrity under stress. The popularity of welded mesh is increasing as it can be cut and formed with relative ease.
Welded Mesh terminology
Mesh- The distance between two adjacent parallel wires, measured from centre to centre of the wires
Diameter-Thickness of the wire
Stocked and custom made stainless steel welded wire mesh rolls
We stock an extensive range of stainless steel welded mesh rolls. Our roll widths are 1220mm to 1524mm with a length of 30m. The wire diameter starts at 0.8mm to 2.5mm and the mesh from 6.35mm to 50.8mm. For further information on our stocked stainless steel welded mesh rolls refer to the tables;
For requirements that are not listed please contact us with your enquiry.
Stainless Steel
Welded Mesh Calculations
- Mesh mm
- Diam mm
- Open Area %
- Weight Squ m
