Stainless steel is the optimum solution for reinforcing mesh in corrosive environments and critical structures and infrastructure.
Stainless steel reinforcing mesh will provide long term performance and extend the life of reinforced concrete structures and infrastructure.
Stainless steel provides a more sustainable choice than traditional carbon steel reo, benefits include:
Corrosion resistant (prevents chloride induced corrosion)
Concrete cover can be reduced
Concrete sealant can be eliminated
Maintenance and repair costs reduced
Easy to handle, bend & weld and can withstand damage during construction
Cost effective choice for when future maintenance or access is difficult
Overall reduced life cycle costing
Stainless steel reinforcing mesh is commonly used for a range of applications in corrosive environment, waste water plants, structures that require a long life and when future maintenance or access is difficult including:
- Sea walls
- Structures in splash zone
Stocked Product Specifications ready for same day despatch
Mesh 25mm to 200mm
Wire Diam 2.5mm to 6mm
Grade 304 & 316
Length x Width 2400mm x 1200mm
Finish Mill also known as off the machine
Refer to The The Australian Stainless Steel Development Association (ASSDA) Blog
Stainless steel reinforcement- Standing the test of time
Australia’s largest stockist of Stainless Steel Wire & Mesh
We have the largest and most comprehensive Australian stock holding of stainless steel wire and mesh in our purpose laid out warehouse with over: 25 Stainless Steel Welded Mesh specifications in 1200 x 2400mm panels.
Design & Install Considerations
Practical information for your consideration.
|wdt_ID||PARENT CODE||PRODUCT IMAGE||MESH MM||WIRE DIAMETER MM||DATA SHEET LINK||REQUEST A QUOTE||VARIANTS|
|1||SSWP 025x025 2.50||25 x 25||2.5||Quote||
|2||SSWP 025x025 3.00||25 x 25||3||Quote||
|3||SSWP 025x050 3.00||25 x 50||3||Quote||
|4||SSWP 040x040 3.00||40 x 40||3||Quote||
|5||SSWP 040x040 4.00||40 x 40||4||Quote||
|6||SSWP 050x050 3.00||50 x 50||3||Quote||
|7||SSWP 050x050 4.00||50 x 50||4||Quote||
|8||SSWP 050x050 5.00||50 x 50||5||Quote||
|9||SSWP 050x075 5.00||50 x 75||5||Quote||
|10||SSWP 075x013 4.00||75 X 13||4||Quote||
|11||SSWP 100x100 3.00||100 x 100||3||Quote||
|12||SSWP 100x100 5.00||100 x 100||5||Quote||
|13||SSWP 100x100 6.00||100 x 100||6||Quote||
|14||SSWP 100x100 8.00||100 x 100||8||Quote||
|15||SSWP 150x150 6.00||150 x 150||6||Quote||
|16||SSWP 200x200 6.00||200 x 200||6||Quote||
Note: To prevent damage while in transit all stainless steel welded panels will be delivered on a non-returnable skid.
Stainless Steel Welded Panels- More Information
Welded Mesh Vs Woven Mesh
Welded wire mesh typically has larger openings than woven wire mesh. The wires are welded at each intersection giving the mesh strength and the capability of maintaining its integrity under stress. The popularity of welded mesh is increasing as it can be cut and formed with relative ease.
Welded Mesh terminology
Mesh- The distance between two adjacent parallel wires, measured from centre to centre of the wires.
Diameter-Thickness of the wire
Stocked and custom made welded wire mesh panels
We carry an extensive range of welded mesh panels. Our stocked panels have a width of 1200mm and length of 2400mm the wire diameter starts at 2.50mm to 6mm and the mesh from 25mm to 200mm. For further information on our stocked welded mesh panels refer to the tables;
For a requirement larger than our stocked panels, custom made panels can be made with a width of up to 2400mm and a length of up to 3000mm.
All our welded panels have edges trimmed (flush).
If you require your panels to be fabricated, we can recommend a fabricator to suit your application.
Construction br />Reinforcing br/>Architectural br />Aviaries/ Zoos br />Landscaping/Green Walls br />Food processing br />Bird Proofing
Welded Mesh Calculations
- Mesh mm
- Diam mm
- Open Area %
- Weight Squ m