roof safety mesh
Product Information PDF
Harsh
Environments
Corrosion
Resistant
Prevents Galvanic
Reaction Between
Dissimilar Metals
Galvanised
Stainless Steel 316
PVC Coated
Stainless Steel 316

PVC Coated Stainless Steel Roof Safety Mesh

SSWM have developed PVC Coated stainless steel roof safety mesh  as an effective solution for galvanic reaction between dissimilar metals.

Stainless steel roof safety mesh provides fall protection during construction and maintenance for the life of the building.

Benefits of PVC coated stainless steel;
– PVC coating prevents the galvanic reaction between dissimilar metals
– Stainless steel wire will not corrode even if PVC coating is damaged
– Flexible coating will bend without cracking
– UV stabilizer contained to protect from UV

Roof safety mesh is manufactured from resistance welded stainless steel wire;
– Wire diameter                  2mm
– Mesh longitudinal           150mm
– Mesh transverse              300mm
– Roll width                         1800mm
– Roll length                        50m

Australian Standards & Installation
Refer to ‘More Information’ for Australian Standards & Installation information.

Technical Information
Click on the technical ‘data sheet link’ PDF in the table below for the specifications and information on our roof safety mesh to assist with your specifying and ordering.

Speed to Market
Same day despatch when your order is received by 9am for Australia wide delivery.

Contact Us

Print Table

PVC Coated Stainless Steel Roof Safety Mesh

50 Metre Rolls

Product CodeMesh mmWire Diameter mmWidth mmApprox Weight KgGradeFinishData Sheet LinkRequest a Quote
SSWMRM 150 2.0 1806 PVC150 x 3002.00180026.5316PVCPDF

Roof Safety Mesh Australian Standards

Australian Standards
✔
 AS/NZS 4389:2015 ‘Safety Mesh’ complies to load testing
Tensile strength of wire minimum 600Mpa exceeding requirement of 450Mpa
✔ Each production run of roof safety mesh is tested and complies to above
✔ AS 2331.3.1:2001 (R2017) ‘Neutral Salt Spray Test’ PVC Coated tested to 96 hours

Installation
✔ Prior to installation refer to local ‘Code of Practice’ for safe work on roofs and SA HB 39:2015
✔ With every roll ‘Recommended Fixing Details’ sheet is provided

Code of Practice
For ‘Code of Practice’ for safe work on roofs click on the links below;
Victoria
Work Safe Victoria: Prevention of falls in general construction
NSW
Work Cover NSW: Safe work on roofs
Part 1: Commercial and Industrial buildings
Australia National
Safe Work Australia: National code of practice for the prevention of falls in general construction

Australian Standards
✔
AS/NZS 4389:2015 ‘Safety Mesh’ complies to load testing
Tensile strength of wire minimum 600Mpa exceeding requirement of 450Mpa
✔ Each production run of roof safety mesh is tested and complies to above
✔ AS 2331.3.1:2001 (R2017) ‘Neutral Salt Spray Test’ PVC Coated tested to 96 hours

Installation
✔ Prior to installation refer to local ‘Code of Practice’ for safe work on roofs and SA HB 39:2015
✔ With every roll ‘Recommended Fixing Details’ sheet is provided

Code of Practice
For ‘Code of Practice’ for safe work on roofs click on the links below;
Victoria
Work Safe Victoria: Prevention of falls in general construction
NSW
Work Cover NSW: Safe work on roofs
Part 1: Commercial and Industrial buildings
Australia National
Safe Work Australia: National code of practice for the prevention of falls in general construction

For further information please have a read of our great blog article ‘What is the Solution for Roof Safety Mesh in Australia’s Harsh Environment?’ 

There are no calculators that are relevant for Roof Safety Mesh. However the calculators that we have are …