Stainless Steel
Screening / Sieving
Stocked
TechnicalStainless steel woven wire mesh for screening / sieving commonly used in industry.
Stainless steel woven mesh has excellent properties which make it an ideal material for screening / sieving:
Long term performance
 Heat resistance
 Ease of fabrication
 Cleanability and hygiene properties
 Strength
 Life cycle costing
 Low environmental impact
Stocked Product Specifications ready for same day despatch
| Mesh | 500 inch per lineal inch (fine mesh) to 1 inch per lineal to (coarse mesh) |
| Weave | Plain, Twill, Lock Crimp & Inter Crimp Weave |
| Grade | 304 & 316 |
| Length x Width | 2m Rolls / Sheets x 1245mm width 10m length x 1550mm width rolls 30m length x 1245mm, 1550mm and 1830mm width rolls |
| Finish | Mill also known as off the machine |
Minimum Sale Quantities
915mm, 1220mm & 1245mm width – 2 lineal meters. Then sold in multiples of 1 metre.
1550mm width – 10 lineal meters. Then sold in multiples of 10 metres.
^ Sold 30m roll only.
Australia’s largest stockist of stainless steel wire & mesh
We have the largest and most comprehensive Australian stock holding of stainless steel wire and mesh in our purpose laid out warehouse with over: 350 stainless steel woven mesh specifications including mill finish, black powder coated, hollander mesh & bolting cloth in 30m, 10m, 5m & 2m rolls in varying widths
Testing / Standards
Our Stainless Steel Woven Mesh is manufactured to ASTM E2016-15 ‘Standard Specification for Industrial Woven Wire Cloth’.
Design & Install Considerations
Practical information for your consideration.
Care & Maintenance
Stainless steel is a low maintenance material, but not maintenance free. Refer to our CARE page for further information.
Speed to Market
Same day despatch when your order is received by 9am for Australia wide delivery.
Stainless Steel
SCREENING / SIEVING MESH
Commercial Grade Woven Stainless Steel Mesh Regularly used in Industry
30 Metre Rolls
STAINLESS STEEL WOVEN MESH ROLLS
| wdt_ID | PARENT CODE | PRODUCT IMAGE | MESH | SWG | APERTURE MM | WIRE DIAMETER MM | APPROX % OPEN | MICRON | TECHNICAL DATA SHEET | REQUEST A QUOTE | VARIANTS | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | SSWO 00026 |  |
500 | 50 | 0.026 | 0.025 | 26 | 26 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 2 | SSWO 00034 |  |
400 | 49 | 0.034 | 0.03 | 28 | 34 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 3 | SSWO 00043 |  |
325 | 48.5 | 0.043 | 0.035 | 30 | 43 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 4 | SSWO 00045 |  |
300 | 48 | 0.045 | 0.04 | 28 | 45 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 5 | SSWO 00062 |  |
250 | 48 | 0.062 | 0.04 | 37 | 62 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 6 | SSWO 00077 |  |
200 | 47 | 0.077 | 0.05 | 37 | 77 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 7 | SSWO 00091 |  |
180 | 47 | 0.091 | 0.05 | 42 | 91 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 8 | SSWO 00104 |  |
150 | 45.5 | 0.104 | 0.065 | 38 | 104 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 9 | SSWO 00132 |  |
120 | 44 | 0.132 | 0.08 | 39 | 132 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 10 | SSWO 00154 |  |
100 | 42 | 0.154 | 0.1 | 37 | 154 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 11 | SSWO 00193 |  |
80 | 39 | 0.193 | 0.125 | 37 | 193 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 12 | SSWO 00223 |  |
70 | 38 | 0.223 | 0.14 | 38 | 193 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 13 | SSWO 00250 |  |
60 | 37 | 0.250 | 0.174 | 34 | 250 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 14 | SSWO 00263 |  |
60 | 37.5 | 0.263 | 0.16 | 39 | 263 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 15 | SSWO 00318 |  |
50 | 36.5 | 0.318 | 0.19 | 39 | 318 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 16 | SSWO 00415 |  |
40 | 34 | 0.415 | 0.22 | 43 | 415 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 17 | SSWO 00547 |  |
30 | 30 | 0.547 | 0.3 | 42 | 547 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 18 | SSWO 00567 |  |
30 | 32 | 0.567 | 0.28 | 45 | 567 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 19 | SSWO 00608 |  |
24 | 26 | 0.608 | 0.45 | 35 | 608 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 20 | SSWO 00710 |  |
20 | 24 | 0.71 | 0.56 | 31 | 710 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 21 | SSWO 00758 |  |
24 | 30 | 0.758 | 0.3 | 51 | 758 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 23 | SSWO 00820 |  |
20 | 26 | 0.82 | 0.45 | 42 | 820 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 24 | SSWO 00850 |  |
18 | 24 | 0.85 | 0.56 | 36 | 850 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 25 | SSWO 00920 |  |
20 | 28 | 0.92 | 0.35 | 52 | 920 | Quote |
|
|||||||||||||||||||||||||||||||||||||||||
| 26 | SSWO 01030 |  |
16 | 24 | 1.03 | 0.56 | 42 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 27 | SSWO 01140 |  |
16 | 26 | 1.14 | 0.45 | 51 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 28 | SSWO 01240 |  |
16 | 28 | 1.24 | 0.35 | 61 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 29 | SSWO 01250 |  |
14 | 24 | 1.25 | 0.56 | 48 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 30 | SSWO 01310 |  |
11 | 19 | 1.31 | 1 | 32 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 31 | SSWO 01410 |  |
12 | 22 | 1.41 | 0.71 | 44 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 32 | SSWO 01560 |  |
12 | 24 | 1.56 | 0.56 | 54 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 33 | SSWO 01580 |  |
8 | 16 | 1.58 | 1.6 | 25 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 34 | SSWO 01640 |  |
10 | 20 | 1.64 | 0.9 | 42 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 35 | SSWO 01670 |  |
12 | 26 | 1.67 | 0.45 | 62 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 36 | SSWO 01920 |  |
9 | 20 | 1.92 | 0.9 | 46 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 37 | SSWO 01975 |  |
8 | 18 | 1.975 | 1.2 | 39 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 38 | SSWO 01980 |  |
10 | 24 | 1.98 | 0.56 | 61 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 39 | SSWO 02090 |  |
10 | 26 | 2.09 | 0.45 | 68 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 40 | SSWO 02280 |  |
8 | 20 | 2.28 | 0.9 | 51 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 41 | SSWO 02470 |  |
8 | 22 | 2.47 | 0.71 | 60 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 42 | SSWO 02620 |  |
8 | 24 | 2.62 | 0.56 | 68 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 43 | SSWO 02630 |  |
6 | 16 | 2.63 | 1.6 | 39 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 44 | SSWO 03030 |  |
6 | 18 | 3.03 | 1.2 | 51 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 45 | SSWO 03330 |  |
6 | 20 | 3.33 | 0.9 | 62 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 46 | SSWO 03480 |  |
5 | 16 | 3.48 | 1.6 | 47 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 47 | SSWO 03880 |  |
5 | 18 | 3.88 | 1.2 | 58 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 48 | SSWO 04180 |  |
5 | 20 | 4.18 | 0.9 | 68 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 49 | SSWO 04750 |  |
4 | 16 | 4.75 | 1.6 | 56 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 50 | SSWO 05150 |  |
4 | 18 | 5.15 | 1.2 | 66 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 51 | SSWO 06470 |  |
3 | 14 | 6.47 | 2 | 58 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 52 | SSWO 06870 |  |
3 | 16 | 6.87 | 1.6 | 66 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 53 | SSWO 09500 |  |
2.2 | 14 | 9.5 | 2 | 68 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 54 | SSWO 10200 |  |
2 | 12 | 10.2 | 2.5 | 65 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 55 | SSWO 10700 |  |
2 | 14 | 10.7 | 2 | 71 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 56 | SSWO 11100 |  |
2 | 16 | 11.1 | 1.6 | 76 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 57 | SSWO 12880 |  |
1.6 | 10 | 12.88 | 3 | 66 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 58 | SSWO 16500 |  |
3/4 | 12 | 16.5 | 2.5 | 75 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 59 | SSWO 19000 |  |
1.18 | 12 | 19 | 2.5 | 78 | Quote |
|
||||||||||||||||||||||||||||||||||||||||||
| 60 | SSWO 22250 |  |
1 | 10 | 22.25 | 3.15 | 77 | Quote |
|
Cutting
Please place your woven wire orders that require cutting by 11:00am for same day cut and pick up by 2:30pm
Print Table
Mesh is Tested / Manufactured to:
 |
ASTM International (formerly American Society for Testing and Materials) ✔ ASTM E2016-15 ‘Standard Specification for Industrial Woven Wire Cloth’ Manufactured to |
 |
Technical Data Sheets ✔ Refer to SSWM Technical Data Sheets for further Standards / Testing information and which of the above are relevant to the mesh that you have selected |
Stainless Steel Woven Mesh - More Information
Stainless Woven Mesh Terminology
Mesh – The number of openings per lineal inch.
SWG – Standard wire gauge
Aperture- The distance between two adjacent wires
Diameter- The thickness of the wire before weaving
Pitch- The distance between the middle point of two adjacent wires or the sum of the aperture width and the wire diameter.
% Open Area- The ratio of the area of the aperture to the area of the mesh expressed in percentage terms
Weft- All wires running across the cloth as woven
Stainless Woven Mesh Formulas
Aperture
Calculating the aperture
- Count of a convenient number of apertures (N)
- Measure the length covered by the N apertures (L)
- Measure the wire diameter (D)
- The average aperture (A)
Working example of calculating the aperture of 6/20 woven wire mesh
- Number of apertures counted N = 6
- Length covered by apertures centre to centre L = 25.4mm
- Diameter of wire D = 0.9mm
- Aperture
The woven wire is identified as 3.33mm aperture / 0.9mm diameter
Mesh Count
Percentage Open Area
The mesh has a 62% open area
Micron Conversion
Micron (micrometer) is a unit of measure, in which usually only fine mesh under 1mm is referred to. A micron us a thousandth of a millimetre.
In this example 325/48.5, 0.043mm aperture, 0.035mm diameter is used.
Plain Weave
    
The most common and simplest weaves.Each warp wire (wire running parallel to the length of the cloth) passes alternatively over and under the wires running transversly through the cloth at 90 degree angles.
Intercrimp Weave
    
Has extra crimps in warp and weft wires between intersections.
Lock Crimp Weave
  
Is produced with pre-crimped wire. Lock crimp weave is stabilised by a notch or bump at the wire intersections.
 Twill Weave
Is Produced by passing each fill wire alternatively over and under two warp wires.
Stainless Steel
Woven Mesh Calculations
- Mesh Count
- Wire Diam mm
- Aperture mm
- Open Area %
- Weight Squ m
- Micron (if Aperture =< 1)
