Industrial / Agriculture
You can’t afford to turn off your business on every total fire band day. Is your business protected with Bushfire Mesh? Is it part of your business continuity plan?
Keeping you operating on days of severe, extreme and code red days.
- Quality Assured
- Product Innovation
- Versatile Product Range
- Extensive Stock Holding
- Speed to market
Part of your solution for your bushfire protection against ember attack and radiant heat.
Stainless Steel Bushfire Mesh protects homes, buildings & infrastructure in bushfire prone areas against ember attack and radiant heat.
Our range is designed so there is a mesh to suit any application, from soft to rigid and wide to narrow. The primary use of the mesh is for bushfire protection, how and where you install your mesh will determine which mesh is most appropriate.
SSWM Bushfire Mesh complies with
BCA Regulations 158
Australian Standard AS 3959
Requirements under the Asset Emergency Management System
Requirements under the Government Royal Commission Findings
SSWM Bushfire Mesh has been independently tested by
CSIRO against the Australian and International Standards
United Laboratories (UL) against Unites States and International Standards
Perimeter Ember Fence
Bushfire Mesh Perimeter Ember Fencing is attached to the external perimeter fence of an industrial or agriculture property. The perimeter ember fence will allow the fence line to become the first line of defence for the defendable space. The perimeter ember fence will catch the fire front embers blown along the ground. Bushfire Mesh is tested and shown to create valuable time against a bushfire.
Defendable Space / Asset Protection Zone / Buffer Zones
– Inner Protection Area (IPA), closest to assets, incorporating the defendable space aiming to minimize the impact of radiant heat and direct flame
– Outer Protection Area (OPA), located between IPA and unmanaged vegetation / bush aiming to reduce the intensity of approaching fire, by restricting the pathways to crown fuels, suppressing the level of direct flame, radiant heat and embers attack on IPA and the asset.
Design & Installation
– Can be retrofitted to existing properties
– Installation is simple and quick
– Mesh comes in different widths & lengths and allows customisation to protect your space
Before commencing your installation you should consult a Fire Protection Australia (FPA) Australia- Bushfire Planning and Design (BPAD) Accredited Practitioner and contact your local council and fire authority to ensure you are meeting all the building and AS3959-2018 requirements.
Bushfire Mesh Applications
- Creation of your defendable space and immediate zone around the asset
- Passive asset protection in isolated locations
- Protecting assets that have high risk material storage (chemicals, fuels, feed)
- Providing protection to secondary at risk locations while focus is on defending primary infrastructure
- Fire breaks around highly valued assets and crops
Testing / Standards
SSWM have undertaken extensive testing please refer to the Testing/Standards Tab below.
If the mesh is being used externally for aesthetic purposes, to minimise tea staining please evaluate if the mesh is to be pick- led, passivated and electropolished.
Care & Maintenance
Stainless steel is a low maintenance material, but not maintenance free. Regular cleaning is recommended to prevent the build-up of contaminants such as dirt and salt. Refer to our CARE page for further information.
Speed to Market
Same day despatch when your order is received by 9am for Australia wide delivery.
BLACK BUSHFIRE MESH
|wdt_ID||PRODUCT NAME||PARENT CODE||VIDEO||Product Image||MESH||SWG||APERTURE MM||WIRE DIAMETER MM||GRADE||APPROX % OPEN*||ROLL / SHEET||TECHNICAL DATA SHEET||REQUEST A QUOTE||ORDER ONLINE||Variants|
|1||Ember Stop FLEXI||SSWOB 01230||18||36.5||1.23||0.18||316||76||Quote||Order||
|2||Ember Stop TOUGH||SSWOB 01670||12||26||1.67||0.45||316||62||Quote||Order||
|3||Ember Stop EXTREME||SSWOBS 01510||11||21||1.51||0.8||304||43||Quote||
|4||Ember Stop EXTREME||SSWOBS 01510||11||21||1.51||0.8||316||43||Quote||
BLACK Sold full rolls only
* Pre black powder coat finish
|wdt_ID||PRODUCT NAME||PARENT CODE||VIDEO||PRODUCT IMAGE||MESH||SWG||APERTURE MM||WIRE DIAMETER MM||APPROX % OPEN||TECHNICAL DATA SHEET||REQUEST A QUOTE||VARIANTS|
|1||Ember Stop TOUGH||SSWO 01670||12||26||1.67||0.45||62||Quote||
|2||Ember Stop ULTIMATE||SSWO 01640||10||20||1.64||0.9||42||Quote||
SSWM’s Bushfire Mesh range is a versatile product, not a system and therefore can be fully customised, to best meet the requirements of customers unique applications. SSWM has a strong focus on our independent testing program and we take the learnings from past bushfire events to ensure that our products can withstand Australia’s harsh environment.
CONSTRUCTION OF BUILDINGS IN BUSHFIRE PRONE AREAS
Rev B Independently tested by CSIRO
- Meets the physical properties of the standard
– Aperture < 2mm
– Corrosion Resistant
– Non Combustible
- BAL 12.5 – FZ
Can be used to meet the requirements of the standard where mesh is referenced and if the prescribed construction requirements are met
CORROSION and RELATED PROPERTY TESTS – NEUTRAL SALT SPRAY TEST
- 1000 Hours, No corrosion
SECURITY SCREEN DOORS AND SECURITY WINDOW GRILLES AND
AS 5041 2003 section 8:
METHODS OF TEST- SECURITY SCREEN DOORS AND WINDOW GRILLES
044981 – 1 (Black Ultimate SSWOB 01640)
044981 – 2 (Black Extreme SSWOB 01510)
- Passed, No penetrations
SSWM meets the Building Codes of Australian Regulations 158, the latest Australian Standards AS 3959 for the Construction of Buildings in Bushfire prone areas and satisfies The State Fire Authorities and Various Royal Commission Findings.
Our product development is a collaborative approach encompassing testing, quality and innovation to provide Australian designed, tested and proven Bushfire Mesh.
SIMULTANEOUS DETERMINATION OF IGNITABILITY,FLAME PROPAGATION, HEAT RELEASE AND SMOKE RELEASE
SIMULTANEOUS DETERMINATION OF IGNITABILITY, FLAME PROPAGATION, HEAT RELEASE AND SMOKE RELEASE
- Ignitability Index (0-20) 0
Speed of Flame Index (0-10) 0
Heat Evolved Index (0-10) 0
Smoke Developed Index (0-10)00-1
- Fire Protection Auth
- University Southern QLD
- CFA Victoria
STANDARD SPECIFICATION FOR STAINLESS STEEL WIRE
STANDARD SPECIFICATION FOR INDUSTRIAL WIRE CLOTH
- Manufactured to
Woven Mesh Calculations
- Mesh Count
- Wire Diam mm
- Aperture mm
- Open Area %
- Weight Squ m
- Micron (if Aperture =< 1)