Stainless Steel Black Bushfire Mesh Ember Stop TOUGH

ember-stop-tough

Black Bushfire Mesh Ember Stop TOUGH

$300.00$975.00 +GST

SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 Amtd 1 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.

EMBER STOP MESH tough
Aperture 1.67mm Wire Diam 0.45mm

 

SKU: N/A Category:
Clear
For multiple roll orders please contact [email protected] or 1300 305 148 as order is too large for courier.

Contact Us

Stainless Steel
BLACK BUSHFIRE MESH
Ember Stop Tough

wdt_ID PRODUCT NAME PARENT CODE Product Image MESH SWG APERTURE MM WIRE DIAMETER MM GRADE APPROX % OPEN* ROLL / SHEET TECHNICAL DATA SHEET REQUEST A QUOTE ORDER ONLINE Variants
1 Ember Stop TOUGH SSWOB 01670 12 26 1.67 0.45 316 62 Roll PDF Quote Order
PRODUCT CODEROLL LENGTH MWIDTH MAPPROX WEIGHT KG*REQUEST A QUOTEORDER ONLINE
SSWOB 01670 0196 30301907QuoteOrder
SSWOB 01670 0916 151591517QuoteOrder
SSWOB 01670 1246 1515124523QuoteOrder
SSWOB 01670 1556 1515155029QuoteOrder

SSWOB Sold full rolls only
* Pre black finish
Formability Self Supporting, Rigidity Flexible, Cutting Tin Snips, Other Uses Pet Mesh

Print Table

Mesh is Tested / Manufactured to:

ASTM International (formerly American Society for Testing and Materials)

✔ ASTM E2016-15 ‘Standard Specification for Industrial Woven Wire Cloth’
Manufactured to

Australian Standards
✔ AS 3959-2018 Amdt q
 ‘Construction of Buildings in Bushfire Prone Areas’ meets physical requirements of mesh
Aperture <2mm, Corrosion Resistant, Non Combustible

✔ AS/NZS 1530.3:1999
‘Simultaneous Determination of Ignitability, Flame Propagation, Heat Release and Smoke Release’
✔ FCO-3313 Rev B CSIRO Advisory Report regarding ‘Bushfire Mesh’ range & criteria of AS 3959-2018 Amdt 1
BAL 12.5 – FZ. If used in the prescribed construction manner
✔ AS 2331.3.1 2001 Neutral Salt Spray Test
1000 Hours, No Corrosion
✔ AS 5041 2003 Knife Shear Test
Passed
Technical Data Sheets
✔ Refer to SSWM Technical Data Sheets for further Standards / Testing information and which of the above are relevant to the mesh that you have selected
    No Associated Application.

Stainless Steel
Woven Mesh Calculations

  • Mesh Count
  • Wire Diam mm
  • Aperture mm
  • Open Area %
  • Weight Squ m
  • Micron (if Aperture =< 1)