stainless steel Roof Safety Mesh

roof-safety-featured

Roof Safety Mesh

Stainless steel is the best practice for roof safety mesh for harsh environments.

Stainless Steel Roof Safety Mesh will provide passive fall prevention during construction and maintenance for the life of building.

Stainless Steel is the solution to the corrosion of roof safety mesh and withstands the Australian environment for the life of the building. Galvanised products do corrode and cannot provide adequate protection. Do not take a shortcut when you know there is a safer and longer lasting alternative for your assets.

SSWM have developed PVC Coated stainless steel roof safety mesh as an effective solution for galvanic reaction between dissimilar metals.

SSWM is Australia’s first & only stockist of Stainless Steel Roof Safety Mesh with extensive stock holdings of:
Stainless Steel Roof Safety Mesh– benefits include:
✔ Corrosion resistant

PVC Coated Stainless Steel Roof Safety Mesh– benefits include:
✔ Prevents galvanic reaction between dissimilar metals
✔ Stainless steel wire wont rust like galvanized wire does when PVC coating is damaged or cracked

Applications
Stainless Steel Roof Safety Mesh is commonly used for roofing critical assets and infrastructure. Stainless steel can withstand Australia’s harsh environment including coastal and highly corrosive environments common applications include:

– Warehouses – Schools – Shopping Centres
– Factories – Office Buildings – Sheds

Installation
Prior to installation, refer to local ‘Code of Practice’ for safe work on roofs and SA HB 39:2015. With every roll, a ‘Recommended Fixing Details’ sheet is provided.

Dissimilar metals
Refer to The  The Australian Stainless Steel Development Association (ASSDA) FAQ 1. GALVANIC/DISSIMILAR METAL CORROSION- what it is and how to avoid it

Category:
For multiple roll orders please contact [email protected] or 1300 305 148 as order is too large for courier.
Australia’s largest stockist of stainless steel wire & mesh

Australia’s largest stockist of stainless steel wire & mesh
We have the largest and most comprehensive Australian stock holding of stainless steel wire and mesh in our purpose laid out warehouse with over: 350 stainless steel woven mesh specifications including mill finish, black powder coated, hollander mesh & bolting cloth in 30m, 10m, 5m & 2m rolls in varying widths

Testing / Standards

Testing / Standards / Installation
Refer to Testing / Standars tab below for Australian Standards & Installation information.
Please note installation as per local Code of Practice for safe work on roofs.

Design & Install Considerations

Design & Install Considerations
Practical information for your consideration.

Care & Maintenance

Care & Maintenance
Stainless steel is a low maintenance material, but not maintenance free. Refer to our CARE page for further information.

Speed to Market

Speed to Market
Same day despatch when your order is received by 9am for Australia wide delivery.

Contact Us

Stainless Steel
ROOF SAFTEY MESH

Stainless Steel Welded Mesh
50 Metre Rolls

ROOF SAFETY MESH

wdt_ID PRODUCT CODE PRODUCT IMAGE MESH MM WIRE DIAMETER MM WIDTH MM APPROX WEIGHT KG GRADE FINISH TECHNICAL DATA SHEET REQUEST A QUOTE
1 SSWMRM 150 2.0 1806 150 x 300 2 1800 24 316 Nil PDF Quote
2 SSWMRM 150 2.0 1806 PVC 150 x 300 2 1800 26.5 316 PVC PDF Quote
Print Table

Mesh is Tested to:

AS/NZS 4389:2015 ‘Safety Mesh’
Complies to load testing
Tensile strength of wire minimum 600Mpa exceeding requirement of 450Mpa
Each production run of roof safety mesh is tested and complies to above
✔ AS 2331.3.1 2001 (R2017) Neutral Salt Spray Test
PVC Coated tested 96 Hours, No Corrosion
Technical Data Sheets
✔ Refer to SSWM Technical Data Sheets for further Standards / Testing information and which of the above are relevant to the mesh that you have selected

Installation
✔ Prior to installation refer to local ‘Code of Practice’ for safe work on roofs and SA HB 39:2015
✔ With every roll ‘Recommended Fixing Details’ sheet is provided

Code of Practice
For ‘Code of Practice’ for safe work on roofs click on the links below;
Victoria
Work Safe Victoria: Prevention of falls in general construction
NSW
Work Cover NSW: Safe work on roofs
Part 1: Commercial and Industrial buildings
Australia National
Safe Work Australia: National code of practice for the prevention of falls in general construction

Further information:

Have a read of our great blog article ‘What is the Solution for Roof Safety Mesh in Australia’s Harsh Environment?’ 

Regarding dissimilar metals please refer to The  The Australian Stainless Steel Development Association (ASSDA) FAQ 1. GALVANIC/DISSIMILAR METAL CORROSION- what it is and how to avoid it

 

There are no calculators that are relevant for Roof Safety Mesh. However the calculators that we have are …