Roof Safety Mesh
Roof Safety Mesh
Stainless steel is the best practice for roof safety mesh for harsh environments.
Stainless Steel Roof Safety Mesh will provide passive fall prevention during construction and maintenance for the life of building.
Stainless Steel is the solution to the corrosion of roof safety mesh and withstands the Australian environment for the life of the building. Galvanised products do corrode and cannot provide adequate protection. Do not take a shortcut when you know there is a safer and longer lasting alternative for your assets.
SSWM have developed PVC Coated stainless steel roof safety mesh as an effective solution for galvanic reaction between dissimilar metals.
SSWM is Australia’s first & only stockist of Stainless Steel Roof Safety Mesh with extensive stock holdings of:
Stainless Steel Roof Safety Mesh– benefits include:
PVC Coated Stainless Steel Roof Safety Mesh– benefits include:
Prevents galvanic reaction between dissimilar metals
Stainless steel wire wont rust like galvanized wire does when PVC coating is damaged or cracked
Stainless Steel Roof Safety Mesh is commonly used for roofing critical assets and infrastructure. Stainless steel can withstand Australia’s harsh environment including coastal and highly corrosive environments common applications include:
|– Warehouses||– Schools||– Shopping Centres|
|– Factories||– Sheds||– Office Buildings|
Prior to installation, refer to local ‘Code of Practice’ for safe work on roofs and SA HB 39:2015. With every roll, a ‘Recommended Fixing Details’ sheet is provided.
Refer to The The Australian Stainless Steel Development Association (ASSDA) FAQ 1. GALVANIC/DISSIMILAR METAL CORROSION- what it is and how to avoid it
Australia’s largest stockist of stainless steel wire & mesh
We have the largest and most comprehensive Australian stock holding of stainless steel wire and mesh in our purpose laid out warehouse with over: 350 stainless steel woven mesh specifications including mill finish, black powder coated, hollander mesh & bolting cloth in 30m, 10m, 5m & 2m rolls in varying widths
Design & Install Considerations
Practical information for your consideration.
Speed to Market
Same day despatch when your order is received by 9am for Australia wide delivery.
ROOF SAFTEY MESH
ROOF SAFETY MESH
|wdt_ID||PRODUCT CODE||PRODUCT IMAGE||MESH MM||WIRE DIAMETER MM||WIDTH MM||APPROX WEIGHT KG||GRADE||FINISH||TECHNICAL DATA SHEET||REQUEST A QUOTE|
|1||SSWMRM 150 2.0 1806||150 x 300||2||1800||24||316||Nil||Quote|
|2||SSWMRM 150 2.0 1806 PVC||150 x 300||2||1800||26.5||316||PVC||Quote|
Mesh is Tested to:
|✔ AS/NZS 4389:2015 ‘Safety Mesh’
Complies to load testing
Tensile strength of wire minimum 600Mpa exceeding requirement of 450Mpa
Each production run of roof safety mesh is tested and complies to above
|✔ AS 2331.3.1 2001 (R2017) Neutral Salt Spray Test
PVC Coated tested 96 Hours, No Corrosion
|Technical Data Sheets
✔ Refer to SSWM Technical Data Sheets for further Standards / Testing information and which of the above are relevant to the mesh that you have selected
Prior to installation refer to local ‘Code of Practice’ for safe work on roofs and SA HB 39:2015
With every roll ‘Recommended Fixing Details’ sheet is provided
Code of Practice
For ‘Code of Practice’ for safe work on roofs click on the links below:
Work Safe Victoria: Prevention of falls in general construction
Work Cover NSW: Safe work on roofs
Part 1: Commercial and Industrial buildings
Safe Work Australia: National code of practice for the prevention of falls in general construction
Appendix E of the WorkSafe Victoria document “Prevention of Falls in General Construction” describes the installation of safety mesh
There are no calculators that are relevant for Roof Safety Mesh. However the calculators that we have are …