Stainless Steel Black Bushfire Mesh Ember Stop FLEXI

ember-stop-flexi

Black Bushfire Mesh Ember Stop FLEXI

$330.00$750.00 +GST

SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 Amtd 1 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.

EMBER STOP MESH flexi
Aperture 1.23mm Wire Diam 0.18mm

 

SKU: N/A Category:
Clear
For multiple roll orders please contact [email protected] or 1300 305 148 as order is too large for courier.

Contact Us

Stainless Steel
BLACK BUSHFIRE MESH
Ember Stop Flexi

wdt_ID PRODUCT NAME PARENT CODE Product Image MESH SWG APERTURE MM WIRE DIAMETER MM GRADE APPROX % OPEN* ROLL / SHEET TECHNICAL DATA SHEET REQUEST A QUOTE ORDER ONLINE Variants
1 Ember Stop FLEXI SSWOB 01230 18 36.5 1.23 0.18 316 76 PDF Quote Order
PRODUCT CODEROLL LENGTH MWIDTH MAPPROX WEIGHT KG*REQUEST A QUOTEORDER ONLINE
SSWOB 01230 0616 30306105.5QuoteOrder
SSWOB 01230 0916 15159154QuoteOrder
SSWOB 01230 0916 30309159QuoteOrder
SSWOB 01230 1226 151512205QuoteOrder
SSWOB 01230 1226 3030122011QuoteOrder
SSWOB 01230 1556 151515507QuoteOrder
SSWOB 01230 1556 3030155014QuoteOrder
SSWOB Sold full rolls only
* Pre black finish
Formability Malleable, Rigidity Soft, Cutting Scissors, Other Uses Insect Mesh
Print Table

Mesh is Tested / Manufactured to:

ASTM International (formerly American Society for Testing and Materials)

✔ ASTM E2016-15 ‘Standard Specification for Industrial Woven Wire Cloth’
Manufactured to

Australian Standards
✔ AS 3959-2018 Amdt q
 ‘Construction of Buildings in Bushfire Prone Areas’ meets physical requirements of mesh
Aperture <2mm, Corrosion Resistant, Non Combustible

✔ AS/NZS 1530.3:1999
‘Simultaneous Determination of Ignitability, Flame Propagation, Heat Release and Smoke Release’
✔ FCO-3313 Rev B CSIRO Advisory Report regarding ‘Bushfire Mesh’ range & criteria of AS 3959-2018 Amdt 1
BAL 12.5 – FZ. If used in the prescribed construction manner
✔ AS 2331.3.1 2001 Neutral Salt Spray Test
1000 Hours, No Corrosion
✔ AS 5041 2003 Knife Shear Test
Passed
Technical Data Sheets
✔ Refer to SSWM Technical Data Sheets for further Standards / Testing information and which of the above are relevant to the mesh that you have selected
    No Associated Application.

Stainless Steel
Woven Mesh Calculations

  • Mesh Count
  • Wire Diam mm
  • Aperture mm
  • Open Area %
  • Weight Squ m
  • Micron (if Aperture =< 1)