Bushfire Mesh is a versatile product that is used to defend property and homes against the 3 threats of bushfires.
Bushfire Mesh is installed to protect against embers penetrating gaps within a home or building during a bushfire.
AS3959-2018 Construction of buildings in bushfire-prone areas.
Various sections of AS3959 – 2018 requires a mesh to be used for screens or closing gaps greater than 3mm.
SSWM Bushfire Mesh Shield range has been independently verified by CSIRO and meets the physical properties of AS3959 – 2018.
Installation of Bushfire Mesh TOUGH along exterior perimeter fence.
98.5% of embers that pass bushfire mesh are no longer a threat.
Bushfire Mesh TOUGH shield testing at USQ Toowomba, under bushfire conditions in a ‘mini dragon’ to evaluate its effectiveness in stopping dangerous embers
Bushfire Mesh TOUGH maintains its integrity and form withstanding over 980 degrees celcius.
SSWM’s Bushfire Mesh range exceeds the requirements of AS 3959. Testing has been undertaken by independent organisations for the 3 threats of bushfires:
WHAT THE EXPERTS SAY ABOUT EMBER PROTECTION
“A Fine metal mesh screen is a really good choice, something like stainless is going to give you a really good design life but it is also particular strong even if the wire gauges is very fine. 2mm or smaller aperture between the strands of wire give you a fine enough screen so that embers that try to get through those if any do get through are so small that they have very little to no chance to igniting anything combustible behind it. 2mm or finer aperture stainless mesh would be thego-to.”
Justin Leonard, 31st August 2023
Source: Bushfire Resilience Inc 2023 Webinar 3
SSWM have a range of bushfire shield materials that exceed the requirements of AS 3959. We have protection that can meet your Building’s Bushfire Attack Level (BAL) to deliver the performance you require. Our range of Bushfire Mesh Shield can be used for vents & weepholes, subfloor spaces and door & window protection against embers, flame and radiant heat. To determine the most appropriate product for your application start with your building BAL rating.
FLEXI, a pliable, lightweight mesh that’s easy to manipulate and can be cut with scissors. It’s often referred to as insect mesh, boasting the smallest aperture in our product range at 1.23mm.
Requiring support, FLEXI is a popular choice for retrofitting existing fiberglass insect screens, available in 15 and 30 meter rolls across four different widths, providing flexibility to meet various needs.
Typically installed for BAL Low to 12.5
915 mm Width
15 m Length
Our highly popular TOUGH mesh, ideal for residential use, is easily shaped and maintains its form through memory recognition.
It can be cut with tin snips, is suitable for the widest range of applications and the most popular choice for subfloor protection.
Typically installed for BAL 12.5, 19, 29 & 40
915 mm Width
15 m Length
EXTREME is a heavy-duty mesh with a dual role: a strong security barrier and a resilient bushfire protective shield. Its ability to withstand extreme heat and potential fire hazards makes it an ideal choice for areas prone to intense bushfires.
Typically installed in areas with Bushfire Attack Level (BAL) 40 to Flame Zone (FZ) ratings, EXTREME showcases exceptional strength even in the most extreme environmental conditions.
Typically installed for BAL 40 & FZ
750 mm Width
2,000 mm Length
ULTIMATE, an industrial grade heavy mesh, is highly durable and renowned for its robustness. It serves as both a strong security barrier and a protective layer for bushfire defense.
It is often installed in BAL 40 to FZ areas, requiring tools like a grinder or guillotine for precise fitting. Conveniently available in 30-meter rolls with three width options, it offers flexibility to suit diverse project needs.
Typically installed for BAL 40 & FZ
915 mm Width
30 m Length
Black Powder Coat
Stainless Steel (Uncoated/raw)
SSWM Bushfire Mesh is certified and part of your solution
for your bushfire protection.
Access our Bushfire Mesh Shield brochure for expert
insights into product and testing performance.
SSWM Bushfire Mesh range has been designed so there is a mesh that suits any application, from soft to rigid, wide to narrow and the percentage open allows for excellent visibility. The primary use of the mesh is built for bushfire protection, how and where you install your mesh will determine which mesh is appropriate.
915 mm W
15 m L
Australian Standards:
SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.
Independently Verified:
SSWM Bushfire Shield Mesh range has been independently verified by CSIRO and met the physical properties of AS3959-2018.
915 mm W
15 m L
Australian Standards:
SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.
Independently Verified:
SSWM Bushfire Shield Mesh range has been independently verified by CSIRO and met the physical properties of AS3959-2018.
Australian Standards:
SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.
Independently Verified:
SSWM Bushfire Shield Mesh range has been independently verified by CSIRO and met the physical properties of AS3959-2018.
915 mm W
15 m L
Australian Standards:
SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.
Independently Verified:
SSWM Bushfire Shield Mesh range has been independently verified by CSIRO and met the physical properties of AS3959-2018.
915 mm W
15 m L
Australian Standards:
SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.
Independently Verified:
SSWM Bushfire Shield Mesh range has been independently verified by CSIRO and met the physical properties of AS3959-2018.
750 mm W
2,000 mm L
Australian Standards:
SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.
Independently Verified:
SSWM Bushfire Shield Mesh range has been independently verified by CSIRO and met the physical properties of AS3959-2018.
915 mm W
30 m L
Australian Standards:
SSWM bushfire mesh can be used to meet the requirements of AS3959-2018 for BAL 12.5 -FZ, where mesh is referenced and if the prescribed construction requirements are met.
Independently Verified:
SSWM Bushfire Shield Mesh range has been independently verified by CSIRO and met the physical properties of AS3959-2018.
Bushfire Attack Level (BAL)
Bushfire Mesh Shield can be used to meet the requirements of AS3959 for BAL low to FZ where mesh is referenced and if the prescribed construction requirements are met.
Before commencing your installation you should consult a Fire Protection Australia (FPA) & Bushfire Planning and Design (BPAD) Accredited Practitioner and contact your local council and fire authority to ensure you are meeting all the building and AS3959-2018 requirements.
3 Commercial Court, Tullamarine VIC 3043, Australia
t 1300 304 316 f 1300 305 805
Int t +613 9448 9048 Int f +613 8669 4506
Unit 2/195 Jackson Road, Sunnybank Hills, QLD 4109
P.O Box 358, Tullamarine VIC 3043, Australia
Complete the form below and we will get back to you as soon as possible.
